Table 5 Ethernet Ipv4 Settings Parameters; Table 6 Ethernet Ipv6 Settings Parameters; Table 7 Wi-Fi Settings Parameters; Table 8 Vpn Settings Parameters - Grandstream Networks GAC2500 Administration Manual

Server name The server name of the UCM.
Server URL The URL of the UCM server.
Port The port number of the UCM server.
Access mode The access mode to the UCM server. Default is :HTTP".

Table 5 Ethernet IPv4 Settings Parameters

Parameters Descriptions
Allows users to configure the appropriate network settings on the device. Users
Address Type
could select "DHCP", "Static IP" or "PPPoE".
Enter the IP address when static IP is used.
IP Address
Enter the subnet mask when static IP is used.
Subnet Mask
Enter the default router when static IP is used.
Default Router
Enter the DNS Server 1 address when static IP is used.
DNS Server 1
Enter the DNS Server 2 address when static IP is used.
DNS Server 2
Enter the PPPoE account ID when PPPoE is used.
PPPoE Account
ID
Enter the PPPoE password when PPPoE is used.
PPPoE Password

Table 6 Ethernet IPv6 Settings Parameters

Parameters Descriptions
Allows users to configure the appropriate network settings on the device. Users
IPv6 address type
could select "DHCP" or "Static IP".
Enter the IP address when static IP is used.
Static IPv6
address
Enter the IPv6 prefix length when static IP is used.
IPv6 prefix length

Table 7 Wi-Fi Settings Parameters

Parameters Descriptions
Enable/Disable Enable/disable Wi-Fi. Once enabled, the device will search for available Wi-Fi
Wi-Fi nearby automatically and display below.

Table 8 VPN Settings Parameters

Parameters Descriptions
Name To identify this VPN network, fill in company name or server name you are
connecting to.
Type Defines VPN type. By default it's PPTP (Point to Point Tunneling Protocol).
Server Address Fill in the VPN server URL or IP address.
Firmware Version 1.0.1.34 GAC2500 Administration Guide Page 15 of 54