Making A Call; Direct Dialing - Grandstream Networks GAC2500 User Manual

Hide thumbs Also See for GAC2500:

Table of Contents

The GAC2500 supports also using dial pad to dial out call in Skype for business app.

Making a Call

GAC2500 home screen is the dial screen or you can tap on

1. Enter the dial screen, select account and call mode;

2. Enter the necessary digits on the keypad;

3. Tap on

to dial out.

Note

1. GAC2500 allows users to configure the "#" key as the "Send" key. If users need to cancel this setting, please log in the built-

in Web page to set the parameter "use # as the dial key" to "No".

2. Enter digits in the dial-up box. If the digits or the letters for the digit matches contacts and call history, a dropdown list of

numbers will be displayed. For example, entering 5 (JKL), 6 (MNO), 4 (GHI) and 6 (MNO) will display 5646 or john if contact

"john" exists. Users can then select it to dial out.

3. Users do not need to change call mode to "IP call" to make a IP call. Dial the full IP such as 192*168*124*123#5062 would

make the call. But quick IP call still needs "IP call" selected.

4. If input area has a number, the GAC2500 will check the account call settings to see if "Use # as Dial Key" is enabled or not.

5. If input area has no number, DUT will use '#' as redial directly.

Redial is to dial the last dialed-out number. It is only available when the call log exists.

1. Enter the dial screen;

2. Press the button

Note

You can redial the last dialed-out number, but unable to dial the conference.

Figure 26: GAC2500 Registered Account Status

or tap on "#" to dial the last dialed-out number automatically.

on desktop to access dial screen.

Table of Contents