Maintenance - Wi-Fi Settings - Grandstream Networks GAC2500 Administration Manual

Enters the secret for the 802.1x mode. This option will be appeared when 802.1x mode is EAP-MD5 or
802.1x Secret
EAP-PEAP.
Uploads the CA Certificate file to the phone. (This setting will be displayed only if the 802.1 X mode is
CA Certificate
enabled)
Client Loads the Client Certificate file to the phone. (This setting will be displayed only if the 802.1 X TLS mode
Certificate is enabled)
Loads the private key file to the phone. (This setting will be displayed only if the 802.1 X TLS mode is
Private Key
enabled)
HTTP/HTTPS
Proxy Specifies the HTTP/HTTPS proxy hostname for the phone to send packets to.
Hostname
HTTP/HTTPS
Specifies the HTTP/HTTPS proxy port.
Proxy Port
Bypass Proxy Defines the list of destination IP addresses where no proxy server is needed. Multiple IP addresses can
For be separated by ",".
IPv6 address Select either Statically configured or Auto configured address.
Static IPv6
Set the Static IPv6 address.
address
IPv6 prefix
Enter the IPv6 prefix length, default value is 64.
length
DNS server 1 Enter DNS server 1 when static IPv6 is used.
DNS server 2 Enter DNS server 2 when static IPv6 is used.
Preferred DNS
Enter the preferred DNS server when static IPv6 is used.
Server
Maintenance – Wi-Fi Settings
Table 35: Wi-Fi Settings
Wi-Fi Basics
Wi-Fi Function Enables/disables the Wi-Fi function. The default setting is set to "No".
Permits to scan and select the available Wi-Fi networks within the range if the WiFi feature is enabled.
ESSID Press "Scan" to scan for the available wireless network. The number in brackets represents the signal
intensity.
Wi-Fi Security
ESSID Display the selected ESSID name.
Password Configures the selected ESSID password.