Pairing Gac2500 With A Bluetooth Device; Connecting To A Bluetooth Device - Grandstream Networks GAC2500 User Manual

Pairing GAC2500 with a Bluetooth Device

Before connecting GAC2500 with other Bluetooth device, users must pair them first. They will stay paired afterwards unless
they are manually unpaired. To pair Bluetooth device:
1. On the LCD display device, go to Settings��Bluetooth. Switch the "Bluetooth" option.
2. Select "Bluetooth settings", drag up from LCD bottom and press
"Search for devices".
3. The GAC2500 scans and displays the IDs of all available Bluetooth devices in range. Once the Bluetooth device shows up
in the result, tap on it to start pairing.
4. Confirm the passkey in the prompted message (if any). Or if passcode is required, please refer to the device's
documentation or other procedures to obtain the passcode.

Connecting to a Bluetooth Device

After successfully paired, the device will be connected to the GAC2500 immediately. Users will see this device listed under
"Paired Devices". Tap on
If the connection is lost between the Bluetooth device and GAC2500, go to LCD menu �� Settings �� Bluetooth �� Bluetooth
setting and click on the device name under "Paired devices" again to reconnect.
When enabled headset mode, the connected Bluetooth device could use GAC2500 as a headset audio device. You can see the
Bluetooth device is displayed as an account on the left home screen. You can make dial-ups with this account directly, or as a
party to join conference.
next to the connected device. Users will see options "Rename", "Unpair" and etc.
Figure 23: GAC2500 Bluetooth – Paired Device
button on the remote control and select