Connecting To Network And Devices - Grandstream Networks GAC2500 User Manual

Mode. Set the call mode.
Account. Display all registered accounts. Tap to select account.
Input box. Tap on digits below to input phone number, or tap on the input box to bring out the soft keyboard. You will
see all the matching numbers on the left when you are inputting digits, tap on the number to add it to input box directly,
you can add up to 6 numbers.
Dial-up. Tap to dial out.
Conference. Display the conference line. Tap to access conference interface.
Contacts. Tap to access Contacts interface to add more contacts to the input box.
Hotkeys. This is a quick access to MPK app.
You can slide left or right to the Conference app on other desktops, or dial out multiple numbers to start a conference on
home screen.

CONNECTING TO NETWORK AND DEVICES

The GAC2500 supports a variety of network connections (Ethernet, Wi-Fi) and device connections, you can configure on
GAC2500 or log in the GAC2500 web UI to configure. For more information about using web UI, please refer to the GAC2500
Administration Guide in www.grandstream.com.
Network
Network connection has a variety of ways, one is wired connection via the cables, and the other way is to connect via Wi-Fi.
Ethernet
If the user would like to use Ethernet connection for network access, please connect the Ethernet cable to the LAN port of the
GAC2500. Ethernet connection is turned on as DHCP by default.
To configure Ethernet settings on GAC2500:
1. Plug the Ethernet cable into the LAN port on the back of the GAC2500.
2. Go to LCD menu��Settings��Advanced settings �� Wireless & network �� Ethernet �� IPv4 Settings.
3. Tap on "Address Type" to select DHCP, Static IP or PPPoE as the address type.
For DHCP, save the setting and the GAC2500 should be able to get IP address from the DHCP server in the network.
For static IP, enter IP Address, Subnet Mask, Default Gateway, DNS Server and Alternative DNS server for the GAC2500 to
correctly connect to the network.
Figure 21: GAC2500 Home Screen