Figure 22 Gac2500 Add Wi-Fi Screen - Grandstream Networks GAC2500 User Manual

Audio conference phone for android

Hide thumbs Also See for GAC2500:

Table of Contents

TURNING WI-FI ON OR OFF

Once Wi-Fi is turned on, GAC2500 will automatically start the scanning within the range. A list of Wi-Fi

networks will be displayed as scanning result. Tap on the SSID and enter the correct password

information to connect to the selected Wi-Fi network.

Follow the steps below for static IP usage in Wi-Fi environment:

Tap on one Wi-Fi network in the scanned Wi-Fi list to bring up the dialog that shows signal strength,

security, password and option "Show advanced options".

Select "Show advanced options". The dialog will show additional option "IP settings".

In "IP settings", select Static IP, enter IP Address, Subnet Mask, and Default Gateway for the

GAC2500 to correctly connect to the network.

BLUETOOTH

Users could use the Bluetooth to send or receive files to cellphone, or use Bluetooth speaker and etc.

TURNING BLUETOOTH ON OR OFF

There are two ways to enable Bluetooth:



On the LCD display device, go to Settings->Network->Bluetooth.



Click

to enable the Bluetooth in the drop-down status bar.

Firmware Version 1.0.1.x

Figure 22 GAC2500 Add Wi-Fi Screen

GVC2500 User Guide

Page 33 of 88

Table of Contents