Resume to Call
If the active call is on hold, users could press the "UnHold" button to resume call or tap on the "End" button to hang up the
call.
Call Record
Users could save the call conversations to the GAC2500 by recording during an active call. You can listen to the recordings
from Recorder, please refer to the chapter Recorder for details.
1. During an active call, tap on the "Start Recording" soft key in the bottom to start recording as shown in the figure below:
2. Tap on the Stop Recoding soft key to stop recording.
Call Details
Users could view the call details of the GAC2500 during an active call by following steps below:
Figure 31: GAC2500 Call On Hold Screen
Figure 32: GAC2500 Mew – Start Recording