http://arttel.ru
TURNING WI-FI ON OR OFF
Once Wi-Fi is turned on, GAC2500 will automatically start the scanning within the range. A list of Wi-Fi
networks will be displayed as scanning result. Tap on the SSID and enter the correct password
information to connect to the selected Wi-Fi network.
Follow the steps below for static IP usage in Wi-Fi environment:
1.
Tap on one Wi-Fi network in the scanned Wi-Fi list to bring up the dialog that shows signal strength,
security, password and option "Show advanced options".
2.
Select "Show advanced options". The dialog will show additional option "IP settings".
3.
In "IP settings", select Static IP, enter IP Address, Subnet Mask, and Default Gateway for the
GAC2500 to correctly connect to the network.
BLUETOOTH
Users could use the Bluetooth to send or receive files to cellphone, or use Bluetooth speaker and etc.
TURNING BLUETOOTH ON OR OFF
There are two ways to enable Bluetooth:
On the LCD display device, go to Settings->Network->Bluetooth.
Click
PAIRING GAC2500 WITH A BLUETOOTH DEVICE
Before connecting GAC2500 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are manually unpaired. To pair Bluetooth device:
1.
On the LCD display device, go to Settings->Network->Bluetooth.
Firmware Version 1.0.1.18
http://arttel.ru/shop/ip-telefony/grandstream-gac2500
Figure 22 GAC2500 Add Wi-Fi Screen
to enable the Bluetooth in the drop-down status bar.
GVC2500 User Guide
Page 33 of 98