Maintenance - Recording - Grandstream Networks GAC2500 Administration Manual

Enables the PNP (Plug and Play) feature on the device. If it is enabled, the device will be set as a
Enable PNP provision server to send SIP NOTIFY message including the provision URL to response the client
Feature phone's SIP SUBSCRIBE request. This feature will be enabled if the PNP URL is configured. If this setting
is enabled, the 3CX Auto provision will be disabled automatically.
Configures the URL to provision another client phone's config server path. The URL will be included in
PNP URL
the SIP NOTIFY message.
PNP(3CX) Auto Sets the phone system to broadcast the SIP SUBSCRIBE message during booting up to allow itself to
Provision be discovered and be configured by the SIP platform. The default setting is "Yes".
It is used to set if and how often the phone system will check the server for new firmware and
configuration file downloading. It can be selected from following options: (The default setting is "No")
"No"
Automatic
Upgrade
"Check Every Day"
"Check Every Week"
"Check at a period of time"
Enable
Randomized If set to "Yes", the phone will trigger the upgrade process automatically at a random time point within
Automatic the time window configured without manual trigger.
Upgrade
Hour of the Day Defines at which hour of the day they phone system will check the HTTP/HTTPS/TFTP server for
(0-23) firmware upgrades or configuration files changes.
Day of the Week Defines which day of the week the phone system will check the HTTP/HTTPS/TFTP server for firmware
(0-6) upgrades or configuration files changes
Automatic Configures how the phone system will check the server for new firmware and configuration file
Upgrade Check downloading. It only valid if the user selects "Check at a period of time" in the "Automatic Upgrade".
Interval (m) The default setting is 10080 (namely 7 days).
Firmware
Defines the rules for automatic upgrade and configuration file: Always Check at boot up, when
Upgrade and
Firmware prefix/suffix changes, Skip the Firmware Check.
Provisioning
Disable SIP
NOTIFY Device will not challenge NOTIFY with 401 when set to "Yes".
Authentication
Auto Reboot to If set to "Yes", the phone will automatically start upgrading after downloading the firmware files.
Upgrade Otherwise, users would need confirm in the prompted message in LCD to start upgrading process. The
Without Prompt default value is "Yes".
It is used to reset the phone system to the default factory setting mode. If the "Clear the SD card" is
Factory Reset
checked, the SD card storage mounted to the phone will be format as well.
Maintenance – Recording
Table 39: Maintenance – Recording
Call Rename, download, and delete the recording that is saved in a call or a conference.