Integrated Connection; Gac2500 Lcd Settings; Use The Touch Screen - Grandstream Networks GAC2500 Administration Manual

Hide thumbs Also See for GAC2500:

Table of Contents

Integrated Connection

1. Connect the 12V DC to the power jack on the GAC2500; plug the power adapter into an electrical outlet.

2. After the device boots up, connect the Micro-USB port to the USB port of GVC32xx or PC, as shown above.

3. The LCD will display the cascade connection interface, as shown below

4. Adjust the conference settings by tapping the icons on the interface

Use the Touchscreen

To fully manipulate the GAC2500 capacitive touch screen, use your fingers to operate the following on the GAC2500 icons,

buttons, menu items, onscreen keyboard and etc.

Tap

Slightly touch the screen with fingertip to initiate menu, options or applications. For example, to select items on the screen

(e.g., setting options, apps and etc.); to press onscreen buttons (e.g., "End" or "Options" soft key during the call); to type letters

and symbols using the onscreen keyboard.

Figure 3: Connecting the GAC2500

Figure 4: Connection Interface on the GAC2500

Figure 5: GAC2500 Finger Gestures on the Touch Screen

Table of Contents