Connecting To Network And Devices; Network; Ethernet; Wi-Fi - Grandstream Networks GAC2500 User Manual

Audio conference phone for android

Hide thumbs Also See for GAC2500:

Table of Contents

http://arttel.ru

The GAC2500 supports a variety of network connections (Ethernet, Wi-Fi) and device connections, you

can configure on GAC2500 or log in the GAC2500 web UI to configure. For more information about using

web UI, please refer to the GAC2500 Administration Guide in www.grandstream.com.

Network connection has a variety of ways, one is wired connection via the cables, and the other way is to

connect via Wi-Fi.

If the user would like to use Ethernet connection for network access, please connect the Ethernet cable to

the LAN port of the GAC2500. Ethernet connection is turned on as DHCP by default.

To configure Ethernet settings on GAC2500:

Plug the Ethernet cable into the LAN port on the back of the GAC2500.

Go to LCD menu->Settings->Network->Ethernet->IPv4 Settings.

Tap on "Address Type" to select DHCP, Static IP or PPPoE as the address type.

 For DHCP, save the setting and the GAC2500 should be able to get IP address from the DHCP

server in the network.

 For static IP, enter IP Address, Subnet Mask, Default Gateway, DNS Server and Alternative DNS

server for the GAC2500 to correctly connect to the network.

 For PPPoE, enter PPPoE account ID and password so the GAC2500 can get IP address from the

PPPoE server.

Wi-Fi is supported and built-in on the GAC2500. On the LCD display, go to Settings->Network-> Wi-Fi to

turn on and configure Wi-Fi.

Firmware Version 1.0.1.18

http://arttel.ru/shop/ip-telefony/grandstream-gac2500

CONNECTING TO NETWORK AND DEVICES

GVC2500 User Guide

Page 32 of 98

Table of Contents