Name Attributes; Contacts - Broadsoft - Grandstream Networks GAC2500 Administration Manual

Configures the entry information to be shown on phone's LCD. Up to 3 fields can be displayed.
LDAP Displaying
Example:

Name Attributes

%cn %sn %telephoneNumber
Specifies the maximum number of results to be returned by the LDAP server, valid range from 0 to
Max Hits
4000. If set to 0, server will return all search results. Default setting is 50.
Search Timeout Configures the interval (in seconds) for the server to process the request and client waits for server
(ms) to return. The default setting is 4000 seconds.
LDAP Lookup For Sets the phone system to do the LDAP number searching when making outgoing calls. The default
Outgoing Call setting is "No".
LDAP Lookup For
Sets the phone system to do LDAP number searching for incoming calls. The default setting is "No".
Incoming Call
LDAP Dialing Configures the default account that being used when dialing LDAP contact. Users may choose the
Default Account Account 1-6, the default setting is "Default".
Contacts – BroadSoft
The BroadWorks XSI Directories and Call Logs configuration is completed by the BroadWorks server administrator or service
provider. End users should be given Xsp server URI and user credentials to access the service.
1. Log in Web GUI and go to Contacts �� BroadSoft.
2. Register the BroadWorks account on the phone:
Fill the BroadWorks XSP server address in the Server blank. If the BroadWorks Xsp server requires to use the HTTPS, please
add the header "https://" ahead of BroadWorks Xsp server URI. For example, "https://xsp1.iop1.broadworks.net".
Fill the XMPP port number in the "Port" blank. The default port number is 80. If the BroadWorks Xsp server requires to use
the HTTPS, please fill the HTTPS port number "443" in the blank.
Based on Authentication Type, fill in different authentication information. LogIN Credentials: Fill the BroadWorks XSI
credentials in BroadWorks UserID and Password blanks. SIP Credentials: Fill the SIP Authentication ID in SIP Authentication
ID, and fill the SIP User ID in BroadWorks UserID. Users also need to fill the SIP Authentication Password in Password.
Fill in the action path in Action Path blank.