Contacts - Call History; Contacts - Ldap - Grandstream Networks GAC2500 Administration Manual

Recurring conference
Start date
End date
Conference date
Time zone
Start time
Conference duration (Min)
Remind time
Auto conference
Auto answer for conference
members
Block when enter
Block calls not from members in
schedule
Password
Auto record
Contacts – Call History
Users can browse all history calls, missed and intercepted records.
Contacts – LDAP
Table 22: Contacts – LDAP
Connection Mode Select which protocol will be used for LDAP searching, LDAP or LDAPS.
Server Address Configures the URI of the LDAP (Lightweight Directory Access Protocol) server.
Port Configures the LDAP server port. The default LDAP port number is 389.
Determines the LDAP search base. This is the location in the directory where the search is requested
to begin.
Example:
Base DN
dc=grandstream, dc=com
ou=Boston, dc=grandstream, dc=com
Select in order to enable the conference repeat and how often to repeat the
conference from the drop-down list.
Select the conference start date.
Select whether to repeat the conference indefinitely or set an end date.
If recurring conference is not selected, set the start date of the conference.
Select the time zone.
Select the start time of the conference.
Select the conference duration in minutes.
Select to send a reminder before the conference start.
Select to enable auto conference.
Select to auto answer for conference members.
Select to block when enter.
Select to block call not incoming from members.
Enter the conference password.
Select to auto record.