Module Specifications - Crestron Green Light GLPS-HDSW-FT Design Manual

Module Specifications

GLXP-SW10 and GLXP-SW16
The GLXP-SW10 and GLXP-SW16 are Crestron Green Light switching modules which feature 10 or 16 channels of power switching with The GLXP-SW10 and GLXP-SW16 are Crestron Green Light switching modules which feature 10 or 16 channels of power switching with
rugged, high-current latching relays. The modules are part of a complete Crestron engineered GLPS Green Light switching panel. rugged, high-current latching relays. The modules are part of a complete Crestron engineered GLPS Green Light switching panel.
> > 10 or 16 channels of power switching 10 or 16 channels of power switching
> > Mechanically-latching relays Mechanically-latching relays
> Supports 100 to 277 Volt applications
> Supports 100 to 277 Volt applications
> > 16 Amp, 1 HP load rating per channel 16 Amp, 1 HP load rating per channel
> > Positive air gap at each output Positive air gap at each output
> > Phase-independent channels Phase-independent channels
> > Cresnet communications Cresnet communications
> > Redundant power capability—module powered via line or Redundant power capability—module powered via line or
Cresnet Cresnet
Load Ratings
Switch Channels
Per Channel
Switch Load Types
Relay Lifetime
Power Requirements
Primary
Secondary (optional)
Environmental
Temperature
Humidity
Heat Dissipation
Electrical Regulatory Certifications
UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
UL924, Emergency Power Equipment
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or
other capacitive loads)
Module SCCR Rating - 18kA
CE
Crestron Commercial Lighting Design Guide
10 or 16
16 Amps at 100-277 Volts AC, 50/60 Hz
0.5 HP @ 120 Volts, 1 HP @ 230 Volts, 1 HP @ 277 Volts
Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent
Ballast, High-Intensity Discharge, Motor
Resistive rating: 100,000 on/off operations, 50A @ 277 VAC
General rating: 50,000 on/off operations, 16A @ 120/277 VAC
100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
5 watts at 24 Volts DC, supplied via Cresnet®
32° to 104°F (0° to 40°C)
10% to 90% RH (non-condensing)
136 BTU/Hr
> > Local controls for testing and verification Local controls for testing and verification
> > Local and remote override capability Local and remote override capability
> Non-volatile power failure memory
> Non-volatile power failure memory
25