Crestron Green Light GLPS-HDSW-FT Design Manual page 36

GLXX-HDSW8 and GLXX-HDSW16
The HDSW8 and HDSW16 are Crestron Green Light Express modules that hold GLR-HD-1P and GLR-HD-2P relays. The HDSW8 holds up
to (8) GLR-HD-1P or (4) GLR-HD-2P relays. The HDSW16 holds up to (16) GLR-HD-1P or (8) GLR-HD-2P relays.
GLR-HD-1P
Load Ratings
Switch Channels Single-pole single-throw latching relay
General Use 20 Amps, 347 Volts AC
Tungsten 2400 Watts, 120 Volts AC
Electric Discharge 20 Amps, 347 Volts AC
Lamp
Motor Loads 0.5 HP at 110-125 Volts AC; 1.5 HP at 220-277 Volts AC
Load Types Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage,
Neon/Cold Cathode, Fluorescent Ballast, High-Intensity
Discharge, Motors, Electronic Ballast
Relay Lifetime 30,000 or more on/off operations at full load
Environmental
Temperature -22° to 122°F (-30° to 50°C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 1.5 BTU/Hr
Electrical Regulatory Certifications
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or other
capacitive loads)
SCCR Rating - 14kA
CE
GLR-HD-2P
Load Ratings
Switch Channels Double-pole single-throw latching relay
General Use 20 Amps, 480 Volts AC
Tungsten 2400 Watts, 120 Volts AC
Electric Discharge 20 Amps, 480 Volts AC
Lamp
Motor Loads 0.5 HP at 110-125 Volts AC; 1.5 HP at 220-277 Volts AC
Load Types Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage,
Neon/Cold Cathode, Fluorescent Ballast, High-Intensity
Discharge, Motors, Electronic Ballast
Relay Lifetime 30,000 or more on/off operations at full load
Environmental
Temperature
Humidity
Heat Dissipation
Electrical Regulatory Certifications
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or
other capacitive loads)
SCCR Rating - 5kA
CE
Crestron Commercial Lighting Design Guide
-22° to 122°F (-30° to 50°C)
10% to 90% RH (non-condensing)
3 BTU/Hr
32