Crestron Green Light GLPS-HDSW-FT Design Manual page 21

GLX-HSW8
The GLX-HSW8 is a Crestron Green Light architectural dimming module which
features 8 channels of high inrush switching. The module is part of a
complete Crestron engineered GLPD Green Light dimming panel.
> 8 channels of high inrush switching
> Compatible with lighting and motor loads
> Supports 100 to 277 Volt applications
> 16 Amp load rating per channel
> Arcless switching
> Positive air gap at each output
> Phase-independent channels
> Cresnet communications
> Redundant power capability—module powered via line or Cresnet
> Local controls for testing and verification
> Local and remote override capability
> Non-volatile power failure memory
Load Ratings
Dimmer Channels
Per Channel
Dim Load Types
Switch Load Types
Relay Lifetime
Power Requirements
Primary
Secondary (optional)
Environmental
Temperature
Humidity
Heat Dissipation
Electrical Regulatory Certifications
UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
UL924, Emergency Power Equipment
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or
other capacitive loads)
Module SCCR Rating - 65kA
CE
Crestron Commercial Lighting Design Guide
8
16 Amps at 100-277 Volts AC, 50/60 Hz
0.5 HP @ 120 Volts, 1 HP @ 230 Volts, 1 HP @ 277 Volts
0-10 Volt fluorescent ballast (4-wire); 60 mA max current sink
Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent
Ballast, High-Intensity Discharge, Motor
1,000,000 on/off operations at full electronic ballast load
100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
5 watts at 24 Volts DC, supplied via Cresnet®
32° to 104°F (0° to 40°C)
10% to 90% RH (non-condensing)
112 BTU/Hr
17