Crestron Green Light GLPS-HDSW-FT Design Manual page 30

G G LXP-HSW8 and GLXP-HSW12
The GLXP-HSW8 and GLXP-HSW12 are Crestron Green Light switching modules which features 8 or 12 channels of high-inrush power
switching with rugged, high-current latching relays. The modules are part of a complete Crestron engineered GLPS Green Light
switching panel.
> 8 or 12 channels of high-inrush power switching
> Rugged, high-current latching relays
> Supports 100 to 277 Volt applications
> 16 Amp, 1 HP load rating per channel
> Arcless switching
> Positive air gap at each output
> Phase-independent channels
> Cresnet communications
> Redundant power capability—module powered via line or
Cresnet
Load Ratings
Switch Channels
Per Channel
Switch Load Types
Relay Lifetime
Power Requirements
Primary
Secondary (optional)
Environmental
Temperature
Humidity
Heat Dissipation
Electrical Regulatory Certifications
UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
UL924, Emergency Power Equipment
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or
other capacitive loads)
Module SCCR Rating - 18kA
CE
Crestron Commercial Lighting Design Guide
8 or 12
16 Amps at 100-277 Volts AC, 50/60 Hz
0.5 HP @ 120 Volts, 1 HP @ 230 Volts, 1 HP @ 277 Volts
Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent
Ballast, High-Intensity Discharge, Motor
1,000,000 on/off operations at full electronic ballast load
100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
5 watts at 24 Volts DC, supplied via Cresnet®
32° to 104°F (0° to 40°C)
10% to 90% RH (non-condensing)
HSW8: 112 BTU/Hr
HSW12: 160 BTU/Hr
> Local controls for testing and verification
> Local and remote override capability
> Non-volatile power failure memory
26