19.3.11 Removing The Crankshaft - KTM 790 Adventure R 2019 Repair Manual

19.3.10 Removing the torque limiter and starter idler gear
- Take off torque limiter
O
with washer.
• Info
I
The washer usually sticks to t he engine case.
- Take off shaft
8
and starter idler gear
8
with needle bear-
ing and washers
C,.
• Info
I
The rear washer usually sticks to the engi ne case.
19.3.11 Removing the crankshaft speed sensor
- Remove screws
O .
- Pull rubber grommet
8
out of the engine case.
- Remove the crankshaft speed s.ensor.
ENGINE 19
265