Plugs - KTM 790 Adventure R 2019 Repair Manual

25 IGNITION SYSTEM
EP
005240- L0
25.3 Changina the s~ark plugs
392
Ignition coil, cylinder 1 - check the primary winding resistance.
0
Measure the resistance between the specified points.
Ignition coil pin
1 -
Ignition coi l pin
3
Ignition coil
Primary windi ng resis-
I
0.70 ... 0.90
n
tance at: 20 °C (68 °F)
»
If the displayed value does not correspond to nominal
value:
- Change the ign ition coi I.
- Disconnect ignitio11 coil 2, cyl inder 2.
Ignition coil, cylinder 2 - check the primary winding resistance.
0
Measure the resistance between the specified points.
Ignition coil pin
1 - Ign ition coi
l pin
3
Ignition coil
Primary winding resis-
I
0.70 .. . 0.90
n
tance at: 20 °C (68 °F)
»
If the displayed value does not correspond to nominal
value:
- Change the ign ition coil.
Finishing work
- Install the fuel tank.
(I•
p.
117)
- Install the engine guard. ( p. 138)
- Install the right fuel tank spoiler.
(I!...
p. 135)
- Install the right side cover. (I p. 131)
- Install the left fuel tank spoiler. ( p. 133)
- Install the battery cover.(.., p. 132)
- Install the left side cover. (~ p. 130)
- Mount the seat. ( p. 114)
Preparatory work
- Remove the seat.
(l:.!-
p. 114)
- Remove the left side cover. ( p. 130)
- Remove the battery cover. (l p. 131)
- Remove left fuel tank spoiler.
(..,J
p. 132)
- Remove the right side cover.
(a
p. 130)
- Remove right fuel tank spoiler. ( p. 134)
- Remove engine guard. ( p. 138)
- Remove the fuel tank. (~ p.
114)