Mitel 6915 User Manual page 186

Note:
Your Administrator must enable/disable the beep on the server-side.
If a phone is configured for SCA bridging and it attempts to join a call, but the account on the server does
not have this functionality enabled, an error message displays to the LCD on the phone.
The SCA call bridging feature is disabled by default on all phones. Your Administrator can enable/disable
this feature if required. Contact your System Administrator for more information.
Keys States and LED/Button Behavior
There are two call states on the phones that support SCA bridging:
• Bridge-active - A bridged call is in progress.
• Bridge-held - The 3rd-party (i.e., non-SCA party) in the bridge is on hold.
The following tables provide the key states and LED/image behavior in an SCA bridge call for users
involved in an SCA call (local) and users not involved in the SCA call (remote).
Line Keys
State
Idle
Seized
Progressing (outgoing call)
Alerting (incoming call)
Active
Held
Hold Private
Bridge-Active
Version 1.0
User Guide
Line LED for Local
Off
Solid Green
Green
Flashing Red
Solid Green
Slow Flashing Green
Slow Flashing Green
Solid Green
Additional Features
Line LED for Remote
Off
Solid Red
Solid Red
Off
Solid Red
Slow Flashing Red
Solid Red
Solid Red
180