Mitel 6915 User Manual page 87

Configuring Softkeys
5. Press the down navigation key to move to the Number field (if applicable) and enter a number for the
key using the dialpad keys.
6. Press the down navigation key to move to the Linefield and select a line to apply to the key. This is the
line that the phone opens to dial the number after you press the respective Speed Dial key. By default,
the phone uses Line 1 for the Speed Dial key. If you want to use a different line, press the left and right
navigation keys to select another line.
7. Press the Save softkey to save the speed dial information to the key you selected.
Creating a Speed Dial Softkey Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
2. Select from Key 1 through Key 20 on the Top keys or Select from Key 1 through Key 18 on the Bottom
keys.
3. In the Type field, select Speed Dial to apply to the key.
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter the phone number, extension, or speed dial prefix to apply to this key. If you
enter a speed dial prefix, you must enter the + character at the end of the prefix number (for example,
123456+).
6. In the Line field, select a line to apply to this key. Valid values are 1 through 24.
7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
8. Click Save Settings.
Creating Dialpad Speed Dial Keys Using the Mitel Web UI
1. Click on Operation > Keypad Speed Dial.
2. Select a key from 1 through 9.
81
Version 1.0
User Guide