Mitel 6915 User Manual page 91

Configuring Softkeys
Note:
BLF/List functionality can only be programmed on the left softkeys but BLF/List indicators can be
viewed through the Directory, Received Callers, and Outgoing Redial Lists.
The BLF/List feature on the IP phones is specifically designed to support the BroadSoft BroadWorks
Release 13 Busy Lamp Field feature.
This feature allows the IP phone to subscribe to a list of monitored users defined through the BroadWorks
web portal.
In addition to monitoring the idle and busy state, the BLF/List feature also supports the ringing and held
state. When the monitored user is idle, the corresponding softkey is green. When the monitored user's
phone is ringing, the corresponding softkey turns yellow. When the monitored user on an active call or is
attempting to make a call, the corresponding softkey turns red. Finally, when the monitored user's call is
on hold, the corresponding softkey displays the BLF/List hold icon. Additionally, the corresponding softkey
LED illuminates to match the monitored user's state, either off (idle), solid (busy), or fast flashing/slow
flashing (ringing/on hold).
Note:
You can use a BLF/List-configured key to automatically dial out to the configured extension.
The following table provides the BLF/List states on the phone and the corresponding LED and icon
behavior:
BLF/List State
Idle
Ringing
Connected
Unknown
85
LED Behavior
Off
Fast Flashing Red
Solid Red
Off
Softkey Icon
Version 1.0
User Guide