Mitel 6915 User Manual page 180

Phone Feature
Factory Default
Note:
1. you specify a value of 0 for the Preferred Line parameter, it disables the preferred line focus
feature.
2. If you specify a value of 0 for the Preferred Line Timeout parameter, the phone returns the line to
the preferred line immediately.
Configuring Preferred Line and Preferred Line Timeout
1. Click on Basic Settings > Preferences > General.
2. In the Preferred Line field, select a preferred line to switch focus to after incoming or outgoing calls end
on the phone. Default is 1. Valid values are:
• None (disables the preferred line focus feature)
• 1 through 24.
For example, if you set the preferred line to 2, when a call (incoming or outgoing) ends on the phone (on
any line), the phone switches focus back to Line 2.
Version 1.0
User Guide
Preferred Line Behavior
Factory default and recovery mode clears
the preferred line and preferred line timeout
parameters, and the phone operates in a non-
preferred line mode.
Additional Features
174