Mitel 6915 User Manual page 73

Customizing your phone
Note:
Modifying certain settings on you telephone can significantly enhance energy efficiency and play a role
in environmental conservation. By adjusting the ringer volume and display brightness, you can actively
lower energy consumption. By default, these settings are typically delivered at 50%.
The Display option allows you to set the following on your phone:
• Home Screen Settings:
• Home Screen Mode
• Screen Saver Timer
• Brightness Settings:
• Brightness Level
• Brightness Timer
Home Screen Settings
The Home Screen Mode option on the IP phone allows you to select how your home screen is displayed.
The 6915 IP phone contains two home screen layout options. The default primary home screen mode
provides users with a larger date and time and displays the screen name (if configured) beside the line
number in the top status bar. The secondary home screen mode displays both screen name and screen
name 2 (if configured) and are displayed above the smaller, repositioned date and time.
The Screen Saver Timer option allows you to configure the amount of time (in seconds) the phone must
be idle before the screen saver initiates. When the specified amount of time expires, a screen saver
displaying the date and time and the number of missed calls (if applicable) is displayed on screen.
Configuring the Home Screen Mode and Screen Saver Timer
1.
Press on the phone to enter the Options List.
2. Navigate to the Display option and press the select button or Select softkey.
3. Use the left and right navigation buttons to change the desired home screen mode.
4. Press the down navigation key to highlight Screen Saver Timer.
5. Enter a value, in seconds, using the dialpad keys. You can set the timer from 1 (disabled) to 14400
seconds. Default is 1800 (30 minutes).
6. Press the Save softkey to save your changes.
Brightness Settings
67
Version 1.0
User Guide