Table of Contents
Advertisement
9.4 #RT29-BAK Beach Accent
Kit Installation
CAUTION: Do not place logs directly over burner port holes. Improper
log placement may affect flame appearance and may cause excessive
soot to build upon the glass.
•
If converting to propane, complete the conversion before
installing the accent media. Follow the conversion instructions
included with the kit.
•
Log numbers and rock numbers are located on the bottom
of each media piece. Refer to following instructions and
illustrations for proper placement.
1.
Install refractory. Follow instructions included with the kit.
Figure 9.5, Installation of RT29-BAK
28
GAS FIREPLACE INSERT SETUP
2.
Install the ash panel.
3.
Place the rocks as shown below.
4.
Install driftwood log B1.
5.
Place the rest of the driftwood logs as shown.
6.
Use a stiff or steel bristle brush to distribute rockwool embers
onto the burner and logs.
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#RVT-29-BAK R.3 November 2019
Advertisement
Table of Contents
