Table of Contents
Advertisement
11.9.4 Turn ON the Appliance
1.
With the system in the OFF position, press the remote control
ON/OFF key to turn ON the appliance.
A single 'beep' will emit from the IFC module to confirm
reception of the command.
The LCD screen will display all active icons, and the IFC module will
start the ignition sequence.
11.9.5 Turn OFF the appliance
1.
With the system in the OFF position, press the remote control
ON/OFF key to turn ON the appliance.
A single 'beep' will emit from the IFC module to confirm
reception of the command.
The LCD screen will only display the room temperature and its icon,
and the IFC module will turn off the main burner.
11.9.6 Remote Control Flame Adjustment
This control system has (6) flame levels. If the smart thermostat
operation is activated, then the manual adjustment of the flame
height will be disabled.
1.
Verify the system is in the ON position and the flame level is set
at maximum.
2.
Press the down arrow key once to reduce flame height by one
level until the flame is turned off.
3.
Press the up arrow key once to increase flame height by one
step. If the up arrow key is pressed while the system is on, but
the flame is off, the flame will ignite on HI.
4.
A single 'beep' will confirm reception of the command.
Flame Off
Flame Level 5
11.9.6.1 Deactivate Flame Modulation
1.
Verify all (3) AAA batteries are installed in the remote control
battery bay.
2.
Remove (1) AAA battery.
3.
Press and hold the on/off key and the mode key at the same
time.
4.
Reinsert (1) AAA battery.
While still holding the on/off key, let go of ONLY the mode key.
5.
6.
Index over to the flame graphic on the LCD screen to edit. Use
the up or down arrow key to choose 'ON' or 'OFF' .
#RVT-29-BAK R.3 November 2019
Flame Level 1
Flame Level Maximum
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
11.9.7 Remote Control Thermostat Operation
11.9.7.1 Room Thermostat
The remote control can operate as a room thermostat. The thermostat
can be set to a desired temperature to control a room's comfort level.
To activate this function,
1.
Press the thermostat key. The LCD screen will display a
temperature bulb graphic, the room temperature and set
temperature.
2.
To adjust the set temperature, press the up or down arrow keys
until the desired temperature is displayed on the LCD screen.
SET TEMPERATURE
11.9.7.2 Smart Thermostat
The smart thermostat function will adjust the flame height based
on the set temperature and the actual room temperature. The smart
thermostat function automatically adjusts the flame down when the
room temperature reaches the set point. To activate this function,
1.
Press the thermostat key until the 'SMART' appears on LCD
screen on the right side of the temperature bulb graphic.
2.
To adjust the set temperature, press the up or down arrow keys
until the desired temperature is displayed on the LCD screen.
11.9.7.3 Deactivate Remote Control
Thermostat Operation
The thermostat operation function can be deactivated. The remote
control will still operate the main burner on and off, and function
flame, fan, and light modulation. To deactivate this function,
1.
Verify all (3) AAA batteries are installed in the remote control.
2.
Remove (1) AAA battery.
ROOM TEMPERATURE
OPERATING INSTRUCTIONS
35
Advertisement
Table of Contents
