Table of Contents
Advertisement
NOTICE
Do not remove staples from
the element/gasket
connection.
- Place a straightedge (8) across top of element (C) and measure
(UX")
from bottom of straightedge to bottom of element (See Fig.
4.1 ).
"Replace scavenge tube (D) in cover (E) (cover is still off of tank).
'Measure
(wY") from bottom of cover
to end
of scavenge tube
(See Fig. 4.2). Measurement "Y" should be from 1/8"to 1/4" less
than the measurement
"X". If not, cut to size.
'Remove scavenge tube.
"Repositlon cover, using care to not damage gasket.
·Replace cover mounting screws: tighten in a crisscross pattern to
150 tt-Ibs.
NOTICE
When replacing the element, the scavenge line and related
components
(orifice, check valve, etc.) should be thoroughly
cleaned and
the oil changed.
-Reconnect
service line. Replace scavenge tube.
Reconnect hose.
"Olose service valve. Start unit anctlook for leaks.
"i
'R IE
'N
'N
rc
. 80
.
3
~365
".8 ")
J
Advertisement
Table of Contents
