Table 3-2: Linear Motor Limit And Encoder Connector Wiring - Aerotech ECO225LM Hardware Manual

Electrical Specifications and Installation
Table 3-2: Linear Motor Limit and Encoder Connector Wiring (-E1 and -E2 Incremental Encoder
Options)
Pin Description
1 Signal shield connection
2 Over-Temperature Thermistor sensor
3 +5 V supply input for feedback devices
4 Reserved
5 Reserved
6 Marker-N
7 Marker
8 Reserved
9 Reserved
10 Reserved
11 Reserved
12 Positive (CW) hardware limit
13 Reserved
14 Cosine
15 Cosine-N
16 +5 V power supply
17 Sine
18 Sine-N
19 Reserved
20 Common ground to limit switch
21 Common ground to encoder power
22 Reserved
23 Reserved
24 Negative (CCW) hardware limit
25 Reserved
Mating Connector
Backshell
Connector
28
ECO225LM Hardware Manual
Aerotech P/N
ECK00656
ECK00300
Chapter 3
Connector
Third Party P/N
Amphenol 17-1726-2
Cinch DB-25S
www.aerotech.com