OWNER'S INSTRUCTION
24
Function setting - Auto Cleaning
Auto cleaning is a function to remove moisture or mold after turning off the cooling system by
drying the inside of indoor unit.
B
Press
button repeatedly to select Auto cleaning in the menu.
icon will display and the current status of ENABLE or DISABLE icon will blink.
Move to ENABLE using H I button, and then ENABLE icon will blink. Press
the auto cleaning function.
When returning to DISABLE, press H I button to select DISABLE icon. And then press
ton cancel the auto cleaning function.
L
Press
to exit after setup.
C If no button is selected for about 60 seconds after setup, it exits the setup mode automatically.
C If Set button is not selected before you exit, the changes will not apply.
• Some products may not include auto-drying function.
Function setting - Automatic Setting for Robot Cleaning
Robot Cleaning is a function that a built-in cleaner performs a filter cleaning automatically when
air-conditioner runs for the scheduled hours.
It programs the robot cleaning function runs manually or automatically.
B
Press
Move to AUTO icon using H I button, and press
K
button to set
ing function.
When returning to the manual robot cleaning, press H I button to move to MANUAL icon and
K
K
press
but-
L
Press
C If no button is selected for about 60 seconds after setup, it exits the setup mode automatically.
C If Set button is not selected before you exit, the changes will not apply.
• Some products may not include robot cleaning function.
button repeatedly until
icon is blinking.
K
button to select the automatic robot clean-
button to select the manual robot cleaning function.
button to exit after setup.
OWNER'S INSTRUCTION
25