Table of Contents
Advertisement
DISPLAY MESSAGES
Messages may appear on the display at the start, during or at the end of a wash cycle. An
explanation of these messages will be given below:
• Which message appear on the display
• Possible cause of the message
• How to solve the problem.
CLOSE DOOR PRESS START
Message:
"CLOSE DOOR PRESS START" appears on the display.
Explanation:
This happens when a wash cycle is selected and the "Start" keypad is
pressed while the door is still open.
Solution:
Close the door and press the "Start" keypad.
DOOR FAIL
Message:
"DOOR FAIL" appears on the display and the buzzer sounds.
Explanation:
This happens when the door safety system fails during the wash cycle.
All other machine functions are switched off.
Possible causes:
Possible solution:
DRAIN FAILURE
Message:
Explanation:
Possible causes:
Possible solution:
• Electrical fault in the door lock.
•The door lock may be broken.
• If the door lock is broken, consult your commercial distributor. To
cancel message: press "Stop" to stop the buzzing. When the
problem has been solved, press "Start" to continue.
"DRAIN FAILURE" appears on the display and the buzzer sounds.
This happens when the water is not drained away from the machine
within a set time. The drain valve stays open and all other machine
functions are switched off.
• The drain may be blocked.
• The drain valve may be blocked.
•The drain valve may be broken.
• Unblock the drain.
• If the drain valve is broken, consult your commercial distributor.
To cancel message: Press "Stop" to stop the buzzing. When the
problem has been solved, press "Sta'rt" to continue.
CAUTION
16009607
Except as necessary to perform a particular step in servicing a product, the
electrical power supply should ALWAYS be disconnected.
©1999 Maytag Appliances Sales Company
Section 4. Troubleshooting
4-3
Advertisement
Table of Contents
