Patient Data Query (Pdq); Pdq In The Worklist - Schiller CARDIOVIT FT-1 User Manual

CARDIOVIT FT-1
User Guide
3.6.1

Patient data query (PDQ)

When the unit is connected to SEMA or another hospital patient database (via
network or WLAN), patient data can be filled in automatically when the Patient ID or
Visit ID is entered. This is called Patient Data Query or PDQ.
Patient data query is possible as follows:
• The patient data is filled in automatically after the Pat ID/visit ID has been entered
by the user or read with a barcode reader (confirm by pressing Enter) (see follow-
ing).
The PDQ settings are defined in Menu > Settings > General > Workflow - the
following options are available:
• Patient data query (PDQ mode) - select one of the following:
– Patient ID
– Visit ID
These settings along with other transmission settings are detailed in the system
settings (see Page
PDQ with barcode reader
If a barcode reader is attached (see next page), scan the barcode to enter the Patient
ID / Visit ID. Patient data is filled in automatically when the Patient ID/Visit ID is read
with a barcode reader.
3.6.2

PDQ in the worklist

If you use the "Worklist" workflow, you can search/enter patient data in the same way
(see Page 68).
Tap the Search field and read the Patient ID or Visit ID using the barcode reader. The
corresponding work item is shown in the worklist.
73).
Operation
Patient / recording data
3
3.6
Page 27