Safety Symbols And Pictograms; Symbols Used In This Document - Schiller CARDIOVIT FT-1 User Manual

CARDIOVIT FT-1
1.11
1.11.1
User Guide

Safety Symbols and Pictograms

Symbols used in this document

The safety level is classified according to ISO 3864-2. The following overview shows
the safety symbols and pictograms used in this manual.
For a direct danger which could lead to severe personal injury or to death.
For a possibly dangerous situation which could lead to severe personal injury or to
death.
For a possibly dangerous situation which could lead to personal injury. This symbol is
also used to indicate possible damage to property.
For general safety notes as listed in this chapter.
For electrical hazards, warnings or precautionary measures when dealing with
electricity.
Note For possibly dangerous situations which could lead to damages to property or
system failure. Important or helpful user information.
Reference to other instructions.
Touch-sensitive areas
This symbol is used to designate touch-sensitive areas that might not be self-evident.
Touch (to open/close menus and perform functions)
Move up or down.
Move to the right or left
Scroll up or down using two fingers
Safety Notes
Safety Symbols and Pictograms
1
1.11
Page 11