Connectivity - Schiller CARDIOVIT FT-1 User Manual

9 General and system settings
9.3

Connectivity

Menu Parameter
EMR integration
(EMR = electronic medical re-
cord system)
EMR integration
Server settings
Host
SSL cert. validation
Port
User
Password
Host
Update server
Port
Use DHCP
IP address
Ethernet
Subnet mask
Standard Gateway
DNS server
Wi-Fi enabled
SSID.......
WLAN general
Wi-Fi security
WLAN security
(for WPA/WPA2 person-
Password
al)
Page 82
9.3 Connectivity
Description / selection
None
Schiller Link
Schiller Server
Name of the server
No/Yes
Port address
User name
Password
Schiller Update server
Port address and key Test connection
Identifier address of the device in the TCP/IP network.
E.g.: 255.255.255.0
Gateway IP address.
Domain name of the server
SSID = Enter network name.
Hidden Check box "Hidden" = if the SSID is configured as hidden in the Wi-Fi
network, the check box "SSID Hidden" needs to be activated.
Selection of the encryption protocol
• WPA/WPA2 personal
• WPA2 enterprise / ieee802.1 (additional settings see *)
Enter password for WPA/WAP2 protocol
– No input field displayed
– Device ID is displayed
– Host, port, user and password input fields are displayed. (See fol-
lowing)
Active or Not active. If this is not activated, the following
parameters need to be entered:
Active Not active
SSID + key + (encryption = AES + authentication)
SSID + certificate + (encryption = AES + authentication)
SSID + user name & password + (encryption = AES + authentica-
tion)
CARDIOVIT FT-1