Safety Symbols And Pictograms; Used Symbols In This Document - Schiller AT-10 plus Service Handbook

AT-10 plus
1.7
1.7.1
Service Handbook

Safety Symbols and Pictograms

Used symbols in this document

The safety level is classified according ANSI Z535.4. The following overview shows
the used safety symbols and pictograms used in this manual.
For a direct danger which could lead to severe personal injury or to death.
For a possibly dangerous situation, which could lead to heavy bodily injury or to death.
For a possibly dangerous situation which could lead to personal injury. This symbol is
also used to indicate possible damage to property.
For general safety notes as listed in this chapter.
Used for electrical dangers, warnings and other notes in regarding operation with
electricity.
Note For possibly dangerous situations, which could lead to damages to property or
system failure. Important or helpful user information
Reference to other guidelines
Observe precautions for handling electrostatic sensitive devices
Tools required for a procedure.
Safety notes
Safety Symbols and Pictograms
1
1.7
Page 9