Configuring The Global Network Settings - G&D ControlCenter-Compact Manual

Initial configuration of network settings
4. Select the Network
5. Select the
Interfaces
6. Enter the following data in the
Operational
mode:
IP address:
Netmask:
7. Press to save your settings.
F2

Configuring the global network settings

In complex networks, the global network settings ensure that the matrix switch is
available from all sub networks.
How to configure the global network settings:
1. Press
Ctrl+Num
2. Press F11 to call the Configuration menu.
3. Select the
Network
4. Select the
Interfaces
5. Enter the following data in the
Global prefer- Select the operating mode by pressing
ences
 Static:
 DHCP:
Hostname: Enter the matrix switch hostname.
Domain: Enter the domain the matrix switch is to belong to.
Gateway:
Enter the gateway IP address.
DNS 1: Enter the DNS server IP address.
DNS 2: Enter the IP address of another DNS server (option).
6. Press to save your settings.
F2
14 · G&D ControlCenter-Compact
entry and press Enter
entry and press
Interface A
Press F8 to select the operating mode of
Interface B :
switches off network interface.
 Off:
uses static settings.
 Static:
 DHCP: obtains the settings from a DHCP server.
Enter the interface IP address.
This setting is auto obtained in the DHCP operating mode.
Enter the network netmask.
This setting is auto obtained in the DHCP operating mode.
(default) to open the OSD.
entry and press
Enter
entry and press
Main Network
uses static settings.
auto obtains the settings described below from a
DHCP server.
.
.
Enter
or Interface B
.
.
Enter
paragraph:
F8
section:
Interface A
:
or