Table of Contents
Advertisement
Split editing
When editing in insert mode, you can advance or delay an audio IN point with
respect to the video IN point.
Video IN point
Video and audio OUT point
Audio signals
Audio IN point
Split editing
Split editing restrictions
The following restriction apply during split editing:
e Split IN points cannot be set separately for audio channel 1 and audio channel 2.
e Split IN points can be set for the player audio or the recorder audio, but not for
both. If you set split audio IN points for the player as well as for the recorder, the
IN point set last is given priority.
e Split IN points cannot be used in DT editing. If you set an initial DT playback
speed for a player, and then set an split audio IN point for that player, the split
audio IN point is ignored at execution time.
e An split audio IN point cannot be set for the TO source in A/B roll editing. If set,
it is ignored at execution time.
To execute a split edit
Proceed as follows.
Example: To set.an split audio IN point for the player in cut editing
|
ileeze
BB: 29:88] 8:86
f=i=) 36: 88: 88: 58
BEBE) aes (88:86
wae
b=
Split editing
Chapter 6 Advanced Editing
6-7
HM
Chapter
6
—
E)
Advertisement
Table of Contents
