Table of Contents
Advertisement
Operation mode control section
@ LEARN button
© PREROLL selector
3) SYNCHRO selector
© Tc/RTCICTL selector
Operation mode contro! section
@ LEARN button
Press to automatically measure the start delays of
the connected VTRs.
© PREROLL (preroll time) selector
Set the preroll time to 7 (or 10) seconds, 5 seconds,
or 3 seconds. If you set this selector to 7 seconds,
the preroll time will be either 7 or 10 seconds,
depending on the setting made using the setup
menu.
© SYNCHRO (synchronization) selector
Determines whether or not to synchronize and use
color framing.
ON/CF:
Synchronizes and uses color framing.
This yields a stable picture, but editing
precision is slightly lower.
ON:
Synchronizes but does not use color framing.
OFF:
Does not synchronize.
© TC/RTC/CTL (edit reference) selectors
(for player 1, player 2, and recorder)
Determine the time counter display format for
player 1 (P1), player 2 (P2), and the recorder (R).
TC: Displays the recorded time code (absolute
value). The display is not reset even if you
press the RESET button.
RTC: Displays an incremented or decremented
time code after reset (relative value). Reset
when you press the RESET button.
CTL:
Displays a CTL pulse count after reset.
'Reset when you press the RESET button.
Chapter 2 Names and Functions of Parts
HIM
Chapter
2
2-3 (E)
Advertisement
Table of Contents
