Table of Contents
Advertisement
Control Panel
SSS
a
aS
ee
Manual editing/setup section
cnaptor2
|] TTT TIT
€ REC/STORE (ENTRY + REC) button
@) EDIT/SETUP (ENTRY + EDIT) button
Manual editing/setup section
@ REC/STORE (ENTRY + REC) button
REC (record): Press to put the unit into E-E
mode !), While you keep the button pressed, the
recorder's video, audio 1 and audio 2 input
signals are output to the monitor but not
recorded.
For manual editing, press this button together
with the PLAY button @ in the recorder
operation control section at the point where you
@ EDIT/SETUP (ENTRY + EDIT) button
EDIT:
Press to put the unit into E-E mode, using
the edit mode set with the edit mode buttons.
While you keep the button pressed, the
recorder's input signals selected by the edit
mode are output to the monitor but not
recorded.
For manual editing, press this button together
with the PLAY button @ in the recorder
operation control section at the point where you
wish to begin recording.
SETUP (ENTRY + EDIT):
Press to call up the
search dial setup menu (setup mode).
wish to begin recording.
STORE (ENTRY + REC): If the unit is in
internal EDL mode (see page 7-3(E)), edit data
is saved in the unit's internal memory. If this
button is pressed while you are using the setup
menu, setup data for the current menu item is
written to the unit's EEPROM 2).
1) E-E: Electric-to-Electric
2) EEPROM:
Electrically erasable programmable ROM
2-8 (E) | Chapter 2 Names and Functions of Parts
Advertisement
Table of Contents
