Table of Contents
Advertisement
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
OO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
For customers in the U.S.A.
WARNING
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC rules.
For customers in Canada
This apparatus complies with the Class A limits for radio
noise emissions set out in Radio Interference
Regulations.
Pour les utilisateurs au Canada
Cet appareil est conforme aux normes Classe A pour
bruits radioélectriques, spécifiés dans le Reglement sur
le brouillage radioélectrique.
Bescheinigung des Herstellers
Hiermit wird bescheinigt, daf3 die Schnitt-Steuereinheit
PVE-500 in Ubereinstimmung mit den Bestimmungen
der BMPT-Amisblatt Vig 243/1991 und Vfg 46/1992
funkenst6rt ist. Der vorschriftsmaBige Betrieb mancher
Gerate (z.B. MeBsender) kann allerdings gewissen
Einschrankungen unterliegen. Beachten Sie deshalb die
Hinweise in der Bedienungsanleitung. Dem Bundesamt
fir Zulassungen in der Telekommunikation wurde das
inverkehrbringen dieses Gerates angezeigt und die
Berechtigung zur Uberpriifung der Serie auf Einhaltung
der Bestimmungen eingeraumt.
Sony Deutschland GmbH
Hugo Eckener Str. 20
50829 Kdin
Hinweis
GemaB der Amtsblatter des BMPT Nm. 61/1991 und 6/
1992 wird der Betreiber darauf aufmerksam gemacht,
daB die von ihm mit diesem Gerat zusammengestelite
Anlage auch den technischen Bestimmungen dieser
Amtsblatter genigen muB.
Advertisement
Table of Contents
