Sony PVE-500 Operating Instructions Manual page 67

Previewing Immediately After Setting IN
ade) (| kfm @ Lei (er @=telliiare,
This function is not available in A/B roll editing.
Proceed as follows to use quick editing.
Meceo Oeend mon Oeeer 6
98:980:88:98 98:98:88:96 eas 88:98:68:98
OOOO
br a
Quick edit procedure
2 Press the PREVIEW button.
The still playback positions are set as the IN points for player and recorder, and
a preview begins. However, if you have already set IN points, the existing IN
points are not changed.
3 When you reach the scene where you want to set the OUT point, press the
recorder OUT button while holding down the ENTRY button.
The recorder OUT point is set. About two seconds later, the player and the
recorder stop (unless you are editing in assemble mode, in which case the
recorder stops one second after the IN point).
4 Press the AUTO EDIT button.
An automatic edit begins.
If you want to skip the preview.
In step 2, press the AUTO EDIT button instead of the PREVIEW button.
The edit begins immediately.
When you reach the scene where you want to stop, press the AUTO EDIT button
again, or press the recorder OUT button while holding down the ENTRY button.
mI
Chapter 6
Chapter 6 Advanced Editing GE-3 E
—