General Safety Instructions - Craftex CX Series User Manual

GENERAL SAFETY INSTRUCTIONS

Do not attempt to operate the machine until you have read thoroughly and have understood
completely all instructions, rules and conditions contained in this manual. Failure to comply
can result in accidents involving fire, electric shock, or serious personal injury.
Know your machine. For your safety,
read the owner's manual carefully.
Learn its applications and limitations,
as well as specific potential hazards
pertinent to this machine.
Make sure all tools are properly
grounded. If the tool electrical plug
has three prongs, it should be used in
a three hole electrical socket. If three
prongs or two prongs adapter is used,
the adapter plug must be properly
grounded. Do not remove or disable
the third prong.
Keep all the guards in place and in
good working order. If a guard must be
removed for maintenance or cleaning,
make sure it is properly attached
before using the machine again.
Remove adjusting
wrenches. Form a habit of checking
to see that the keys and adjusting
wrenches are
machine.
Keep your
Cluttered areas and workbenches
increase the chance if an accident.
keys and
removed from
work area clean.
Do not use the machine in dangerous
environments.
Do not use power tools in damp or
wet locations or expose them to rain.
Keep work areas well illuminated.
Keep children away. All visitors
should keep a safe distance from the
work area.
Do not force the machine. It will do
the job better and be safe at the
operating rate for which it is designed.
Do not
attachments to do a job for which they
are not designed.
Wear proper apparel. Avoid loose
clothing,
bracelets and jewelry which could get
caught in moving parts. Non-slip
footwear
protective hair covering to contain long
the hair.
Always use safety glasses. Also,
wear a face or dust mask if the
operation area is dusty. Everyday
eyeglasses only have impact resistant
lenses. They are not safety glasses.
force the machine
gloves, neckties,
is recommended.
or
rings,
Wear
3