See figure-5. Figure-2 Installing the end cap INSTALLING CX250 Slide eight hex bolts into the open slot on the fence rail. INSTALLING CX230 Slide twelve hex bolts into the open slot on the fence rail. See figure-3. Figure-5 Installing the fence...
FENCE PARALLELISM SCALE INSTALLATION AND ADJUSTMENT The fence should always be parallel to the miter slot. To install the scale, make sure the machine is OFF and the cord is unplugged from the To adjust the fence parallel with the miter power source.
Page 9
This warranty shall not apply to consumable products such as blades, bits, belts, cutters, chisels, punches etceteras. Craftex shall in no event be liable for injuries, accidental or otherwise, death to persons or damage to property or for incidental contingent, special or consequential damages arising from the use of our products.