Epson TM-U925 Manual page 119

n = 1: MICR status
Bit Off/On
0 Off
1 On
Off
2
On
Off
3
On
4 On
Off
5
On
Off
6
On
7 Off
· There may be a time lag between receiving FS a 0 or FS c command and selecting MICR
Bit 2:
function. During this period, bit 2 remains On (not selected).
· Remains Off (selected) until the MICR function completes.
· Becomes Off (not waiting) just before starting MICR character reading, or starting MICR
Bit 3:
mechanism cleaning, after detecting the personal check or cleaning sheet, respectively.
Bits 5 and 6: Transmit the current status of the paper sensors.
[Reference] DLE ENQ, FS a 0, FS b, FS c
Appendix B: Transmit Status Identification
EPSON
Hex Decimal
00 0 Not used. Fixed to Off.
02 2 Not used. Fixed to On.
00 0 MICR function selected.
04 4 MICR function not selected.
00 0 Waits for check paper or cleaning sheet.
08 8 Does not wait for check paper or cleaning sheet.
10 16 Not used. Fixed to On.
00 0 Check paper is detected by the check insertion sensor.
20 32 Check paper is not detected by the check insertion sensor.
00 0 Check paper is detected by the check ejection sensor.
40 64 Check paper is not detected by the check ejection sensor.
00 0 Not used. Fixed to Off.
TITLE
TM-U925
Specification
(STANDARD)
Function
SHEET NO.
REVISION
NEXT
A
112
SHEET
111