Error Processing; Error Types - Epson TM-U925 Manual

3.8 Error Processing

3.8.1 Error types

1) Errors that automatically recovered
Error Description
Print head The temperature of the
temperature print head is extremely
error high.
NOTE: A print head temperature error is not abnormality.
2) Errors that may be recovered
Error Description
Auto-cutter Auto-cutter does not
error work correctly.
Home position The home position
detection error cannot be detected due
to a paper jam.
Carriage Carriage motor is in an
detection error abnormal condition due
to a paper jams.
Slip ejection Slip cannot be ejected
error even if the specified
amount of paper is fed.
NOTES: 1. Recoverable errors are recovered by using DLE ENQ 1 or DLE ENQ 2.
2. When the printer recovers from an error using DLE ENQ 1 while slip paper is selected,
the printer first ejects the slip, then loads paper. However, when the printer recovers
from a slip ejection error, the printer only ejects the slip and does not load paper.
3. When the printer recovers from an error using DLE ENQ 2 while slip paper is selected,
the printer first ejects the slip, then goes to two-sheet mode.
EPSON
Table 3.8.1 Automatically Recovers Error
ERROR LED blinking pattern
Table 3.8.2 Recoverable Errors
ERROR LED blinking pattern
TITLE
TM-U925
Specification
(STANDARD)
Approx. 160msec
Approx. 160msec
SHEET
REVISION
A
Recovery
Recovers
automatically
when the print
head cools
Recovery
Recovers by
DLE ENQ 1 or
DLE ENQ 2.
Recovers by
DLE ENQ 1 or
DLE ENQ 2.
Recovers by
DLE ENQ 1 or
DLE ENQ 2.
Recovers by
DLE ENQ 1 or
DLE ENQ 2.
NO.
NEXT SHEET
45 44