xFusion Digital Technologies FusionServer X6000 V6 Product White Paper page 45

FusionServer X6000 V6 Server
Technical White Paper
●
●
●
●
●
●
Device Security
●
●
●
●
●
●
●
Transportation Precautions
Contact the manufacturer for precautions before attempting transportation.
Transportation precautions include but are not limited to:
●
Issue 08 (2023-12-12)
Figure 8-3 Wearing an ESD Wrist Strap
Exercise caution when using tools.
If the installation position of a device is higher than the shoulders of the
installation personnel, use a vehicle such as a lift to facilitate installation. Prevent
the device from falling down and causing personal injury or damage to the
device.
The equipment is powered by high-voltage power sources. Direct or indirect
contact (especially through damp objects) with high-voltage power sources may
result in serious injury or death.
Ground the equipment before powering it on. Otherwise, personal injury may be
caused by high electricity leakage.
Do not use the ladder unsupervised. Have someone else hold the ladder steady
to prevent accidents.
Do not look into optical ports without eye protection.
Use the recommended power cables at all times.
Power cables are used only for dedicated servers. Do not use them for other
devices.
Before operating equipment, wear ESD clothes and gloves to prevent
electrostatic-sensitive devices from being damaged by ESD.
When moving a device, hold the bottom of the device. Do not hold the handles of
the installed modules, such as the PSUs, fan modules, drives, and the
mainboard. Handle devices with care.
Exercise caution when using tools.
Connect the primary and secondary power cables to different power distribution
units (PDUs) to ensure reliable system operation.
Ground a device before powering it on. Otherwise, high leakage current may
cause device damage.
The logistics company engaged to transport the device must be reliable and
comply with international standards for transporting electronics. Ensure that the
device being transported is always kept upright. Take necessary precautions to
prevent collisions, corrosion, package damage, damp conditions and pollution.
Copyright © xFusion Digital Technologies Co., Ltd.
8 Safety Instructions
39