xFusion Digital Technologies FusionServer X6000 V6 Product White Paper page 29

FusionServer X6000 V6 Server
Technical White Paper
Table 5-6 SAS/SATA drive indicators
Activity Indicator
(Green)
Steady on
Blinking at 4 Hz
Steady on
Blinking at 1 Hz
Off
Steady on
NVMe Drive Indicators
Figure 5-12 NVMe drive indicators
●
Issue 08 (2023-12-12)
Fault Indicator
(Yellow)
Off
Off
Blinking at 1 Hz
Blinking at 1 Hz
Steady on
Steady on
If the VMD function is enabled and the latest VMD driver is installed, the NVMe
drives support surprise hot swap.
Table 5-7 NVMe drive indicators (VMD enabled)
Activity
Indicator
(Green)
Off
Steady on
Blinking at 2 Hz
Off
Off
Copyright © xFusion Digital Technologies Co., Ltd.
Description
The drive is detected.
Data is being read or written properly, or
data on the primary drive is being
rebuilt.
The drive is being located.
Data on the secondary drive is being
rebuilt.
A drive in a RAID array is removed.
The drive is faulty.
Fault Indicator Description
(Yellow)
Off The NVMe drive is not detected.
Off The NVMe drive is detected and
operating properly.
Off Data is being read from or written to
the NVMe drive.
Blinking at 2 Hz The NVMe drive is being located.
Blinking at 8 Hz The data on the secondary NVMe
drive is being rebuilt.
5 Hardware Description
23