Wall-Mounting Of The Unit; Connection Of The Air Duct; Air Flow; Connection Of Kitchen (Exhaust) Hood - Salda SMARTY RV Mounting And Installation Instruction

5.7.

WALL-MOUNTING OF THE UNIT

a
Mounting on the wall:
b) The unit must be installed on the mounting brackets.
5.8.

CONNECTION OF THE AIR DUCT

and noise level, you can increase the diameter.
• In order to reduce the level of the noise in the air supply system, install dampers (see the chapter on air supply system installation).
• External air and exhaust system piping should be isolated in order to prevent heat loss and condensation.
• When installing air ducts next to the ventilation equipment, brackets must be used. They suppress vibration and assure secure installation of the
• Air ducts are often mistakenly connected in inappropriate location. The ventilation units bear the labels indicating the correct air duct connection
5.8.1.

AIR FLOW

done by transposing over the back door and the front door.
5.8.2.

CONNECTION OF KITCHEN (EXHAUST) HOOD

•
• If you have any questions regarding the safe installation and use of the product, please contact the manufacturer or its representative.
•
insulating ring.
•
• Carefully remove the lid covering the electric connection intended for the connection of an electrical part of the kitchen hood and the ventilation
unit.
SMARTY RV v2021.1
30 mm
b
90
c
Left version
Right version
90
d
-
EN | 11