Mounting; Unit Placing And Mounting Positioning Requirements - Salda SMARTY RV Mounting And Installation Instruction

THE LIST OF COMPONENTS
PV Supply air fan
PF
TA Extract air temperature sensor
CO CO sensor*
2 2
PC Computer*
M2 Outdoor air damper actuator*
TL Outdoor air temperature sensor
MB-Gateway
RC Stouch or ST-SA-Control remote control panel*
M1 Rotor motor
*Components are not included in standard unit package.
POSIBLE PCB INPUTS/OUTPUTS
FA Fire alarm
H1 Working indication output
5.5.

MOUNTING

•
• When connecting air ducts, consider the labels on the casing of the unit.
• Before connecting to the air duct system, the connection openings of ventilation unit should be closed.
•
•
•
•
ment.
•
•
•
rying out maintenance, servicing and/or repairs
signs may occur.
5.6.

UNIT PLACING AND MOUNTING POSITIONING REQUIREMENTS

Figure 5.6.1. Min. distance to open the door - 1,5xL; Min. distance to open the control box door - H > 400 mm.
10 | EN
IF
IV
TJ
RH
KE1
M3
NET
R
FPP
H2
L
1,5xL
Exhaust fan
Supply air temperature sensor
RH sensor*
Electric heater
Exhaust air damper actuator*
Ventilated premises
Rotor heat exchanger
Fireplace protection
Alarm indication output
H
-
-
SMARTY RV v2021.1