Maintenance; Safety Instructions; General Recommendations For Ventilation System Maintenance; Cover Opening - Salda SMARTY RV Mounting And Installation Instruction

6. MAINTENANCE

6.1.

SAFETY INSTRUCTIONS

Unplug the unit from the mains before opening the door (disconnect the power plug from the outlet or in case a two-pole au-
tomatic circuit breaker installed, disconnect it as well. Make sure that it cannot be turned on by third parties) and wait until the
fans completely stop (for about 2 min.).
6.2.

GENERAL RECOMMENDATIONS FOR VENTILATION SYSTEM MAINTENANCE

COMPONENT
Filters
Fans
Rotor heat exchanger
Control panel
Electric heater
Temperature sensor
Air supply and extract system
Air duct system
6.3.

COVER OPENING

14 | EN
DURING START-UP
Check the connections and the
direction of rotation
Check the direction of rotation
Check the connections
Check the connections
Check electrical connections
Check the connections
Check the tightness
Check the tightness of connections
AT LEAST EVERY 6 MONTHS
indications.
Make sure that the pressure relay/transmitter is clean and clean it
if necessary.
Check cleanliness. Clean, if necessary
Make sure that the impellers are not unbalanced.
hand.
mechanical damage.
Check electrical connections and make sure that these are se-
cured properly and are free of signs of corrosion.
Check cleanliness and clean, if necessary
Check the tension of a belt
Check the connections
tions of the heater
Check the operation
Clean
Clean
Clean
ing unit (contactor), i.e. make sure that its casing has no signs
produce any unusual sounds. All the contactors in the product or
in its accessories must be checked.
-
-
SMARTY RV v2021.1