Table of Contents
Advertisement
2.0 Assembly and Installation
2.1 Installation Planning
NOTE: Follow all national and local building and electrical codes.
•
To reduce the risk of fire, do not store or use gasoline or other flammable vapors and liquids in the vicinity of the heater.
•
If using the power cord supplied, plan a location for the power cord to connect to an electrical box accordingly.
•
Select a suitable location that is not susceptible to moisture and is away from drapes and furniture.
•
Depending on your type of installation the location of where the power cord exits the appliance may need to be changed.
Refer to "Section 2.9 Electrical Outlet Location" for more information.
•
If you are installing this fireplace in a recessed installation then you must use the provided electrical hard-wire kit.
2.2 Selecting Your Installation Options
This appliance can be installed in several different options. This appliance can be:
Wall Mounted
•
Using the supplied hanging bracket the appliance can be hung on a wall.
Recessed installation - Single Sided
•
In this installation you keep both block off plates installed on the fireplace. These block off plates cover the side glass
viewing areas.
Recessed Installation - Corner Application (Left or Right Sided)
•
In this installation you remove the block off plate of the side glass viewing area that you want visible.
Recessed Installation - 3-Sided (Bay) Application
•
In this installation you remove both block off plates of the side glass viewing area. You have the front and both side
viewing areas visible now.
Wall-Mounted with Floating Mantel Kit
Recessed Installation - Single Sided
Figure 1.2 - Installation Options
Hussong Mfg. Co, Inc.
Osseo E-Series Electric Fireplace
Recessed Installation - Corner Application
Recessed Installation - 3-Sided Application
10
Starting Serial Number: 23 OSE5000001 28,
Rev. 2 - Sept. 2023
23 OSE6400001 28, 23 OSE8000001 28
Advertisement
Table of Contents
